ESD anti-static access control system (esd comprehensive electrostatic test data management access control system) is an advanced product that combines electrostatic testing with electronic access control systems and computerized management software. In many places with anti-static areas (EPA), electrostatic shoes and electrostatic wrist The tests carried out are carried out by traditional manual login or supervision, which is not easy to implement, and even makes mistakes. It is difficult to gain the trust of customers and management, and it also forms a huge potential loophole caused by static grounding of personnel. The anti-static access control system proposes a direct and effective solution to these shortcomings to ensure that when the operator enters the EPA area, they are actually prepared for the electrostatic grounding of the personnel, and can be equipped with a combination of three-roller gates, wing gates and other channel gates. It is the control equipment of the pedestrian passage. It can provide an orderly and civilized way for entering and exiting personnel, preventing unqualified entry and exit, and quickly controlling the fall of the pole in emergency situations, and organizing the evacuation of personnel.
Operation steps of anti-static access control system test
Wear anti-static clothes, anti-static shoes, and anti-static straps, anti-static caps and other related anti-static items. Then go to the entrance guard of the anti-static gate to prepare for the test.
Wear an electrostatic wristband at the check-in place at the entrance and exit, and then check-in. Then press the test button by hand. When the three PASS lights are all on, the indicator light on the access control panel of the anti-static gate turns green and push the rod in the direction of the arrow to pass.
Preparing for the test work: The test staff must stand on the foot pedal (on) to prepare for the test item, and the feet must stand in the middle of the footprints.
Bring the card worn on your body close to the card punching device, and the electrostatic controller will automatically read the information on the card.
Press your finger on the test button and watch the required test item displayed on the LCD display, check the name, department, job number or photo and other information. (The test is 0--5S adjustable for a long time, and the card must be re-swiped to test again if it exceeds 5S).
According to the test items of the card, the system will automatically open the gate and the tester will enter; if the test result is unqualified, check your wrist strap or electrostatic shoes according to the test result. The LCD screen and the electrostatic tester will visually display the test result and fail. reason.
After the test, you can also directly watch the gate traffic indicator. The bright green arrow indicates that the test is successful and the gate has been opened and you can pass.
After the test is completed, employees view the results and upload them to the computer in real time to save the record report.