Common methods of improper electrostatic test in purification workshop:
1. Enter the workshop directly without testing
2. Directly fill in the form without testing PASS has been tested, and the test data is inaccurate
3. If the test is unqualified, the PASS is still filled in the paper form
4. Some employees do not test and directly ask someone to fill in the record
Zecheng Intelligent provides the following solutions for the above common improper tests.
1. Entering the workshop without testing?
Solution: The VEL static channel gate shall be configured before entering the purification workshop, and the ESD gate can only be passed after passing the test.
2. Fill in the form directly without testing PASS has been tested, and the test data is inaccurate?
Solution: You can not enter the workshop through the VEL electrostatic gate without static test.
3. If the test is unqualified, the PASS is still filled in the paper form
Solution: The VEL-ESD static electricity management software background will display the tested resistance value in real time, which cannot be modified. It is clear whether it is qualified or unqualified at a glance.
4. Some employees do not test and directly ask someone to fill in the record
Solution: The employee cannot pass the ESD static switch without testing, and the VEL static system software background will display the tester's resistance value information and qualified status in real time.
Networked anti-static gate: swipe the card first, and enter the workshop after passing the memory test according to the card type authorized by the software (hand/electrostatic shoes/hand shoes on the same side/test free card/left/right shoes). The computer electrostatic management software can query the access records, test results, channels and other information. In addition to the LED indicator of the tester, the gate is attached with a 7-inch LCD screen to display the name of the card reader, department, test items and test results.