Electronic factory's requirement standard for anti-static access control-ESD gate system

First of all, grounding is an indispensable project in the electronic workshop. There are many groundings for different purposes in the clean workshop of the electronic industry. It is advisable to use a common grounding system to avoid the unsafe factors caused by the separate grounding of different potentials, and Coupling effects between different ground conductors. Different groundings can use separate grounding wires, but the grounding electrode system is shared and should follow the principle of equipotential bonding.
Secondly, before entering the workshop, it is necessary to confirm whether the electrostatic value of each person is within the qualified range. At this time, it is necessary to set up anti-static gates or esd access control. The principle of VEL's ESD access control system is: through the staff Wearing an electrostatic wrist strap, anti-static shoes and anti-static clothing, through the anti-static floor, and ensuring that there is no problem with the wearable products, the static electricity from the human body can be directly discharged to the ground in real time. It is best to pass the static electricity before the static electricity detection The eliminator removes static electricity from personnel. Under normal circumstances, the resistance range of VEL factory settings is: bracelet + human body: 500 kohms --> 35 megohms; electrostatic shoes + human body: 500 kohms --> 100 megohms.
ESD anti-static access control system function:
The ESD anti-static access control system can realize one person and one test to prevent tailgating. After passing the test, the electrostatic gate will open the door, and the unqualified electrostatic gate will not open the door.
For enterprises with strict ESD requirements, the ESD anti-static access control system can cooperate with smart card authentication to test different permissions, and assign different permissions to different identities. For example, office managers only need to swipe their cards legally to pass the channel, while the workshop Assembly workers need to swipe their cards and pass the static test before they can pass the barrier.
The anti-static access control system cooperates with the software to have the function of real-time display and recording of all event data; all entry and exit records are transmitted to the computer in real time, and can be displayed immediately in the management center computer.
The card swiping system with high-brightness and double-light LCD display function is more user-friendly; when the test fails, it can display the card error, time zone error, holiday control, hand and foot error in real time, so as to remind employees of the test error content Take appropriate action.